All bid deadlines are 11:59pm Pacific Time the date of the bid deadline listed unless otherwise noted.

school Little Axe School District
IFCB Posted : Nov 27, 2024
Bid Deadline : Monday, Jan 13, 2025

Questions Due By : Friday, Dec 13, 2024
Applicant Address : Norman, OK 73026
IFCB ID : 250007250

IFCB Requirements :

·         Before the listed deadlines, all Questions and Bids must be submitted using the on-line IFCB system. Bids submitted before the bid deadline outside of this system will be disqualified. If the system is down before the deadline, please email your bid to info@crwconsulting.com or fax it to 918.445.0049. Bids or questions submitted in this fashion will be disqualified if the on-line system is active at the time of submission. The applicant reserves the right to request and obtain bids outside of the website system if the bid deadline has passed and zero or one bid is received (the intent for this is to follow USAC guidance on obtaining cost-effective bids).

·        For all requested services and/or products listed on this IFCB: proposals that include generic/encyclopedic price lists will be considered non-responsive and will be disqualified. SPAM and/or robotic responses will not be considered valid bid responses and will be disqualified from consideration.

 

·         Bidder must agree to participate in USF Program (AKA “E-rate”) for the corresponding funding year.

 

·         Please include the correct Service Provider Identification Number (SPIN) on your bid.

 

·         By submitting a bid, bidder certifies that the bidder does have a valid (non-red light status) SPIN for the E-rate program at the time of submission. Should the Applicant discover that the bidder is on red light status, or if the FCC classifies the bidder as on red-light status before work is performed and invoices are paid, the contract will be null and void and the applicant will have no payment obligations to the bidder.

 

·         Bidder is expected to provide the lowest corresponding price per E-rate rules.  See https://www.usac.org/e-rate/service-providers/step-2-responding-to-bids/lowest-corresponding-price/ for details.

 

·         Contracts must not prohibit SPIN changes.

 

·         Bidder must agree to provide the Applicant the choice of discount methods (SPI or BEAR).

 

·         Bidder will be automatically disqualified if the District determines that the bidding company has offered any employee of the District any individual gift of more than $20 or gifts totaling more than $50 within a 12 month period. This does not apply to the recent FCC exemptions of the Gift Rule for the COVID pandemic.

 

·         All contracts awarded will be contingent upon E-rate funding and final board approval.  The applicant may choose to do all or part of the project upon funding notification.

 

·         All applicable fees, surcharges, and taxes must be identified on the bid. E-rate rules require the applicants to evaluate the price of eligible goods and services that will be listed on the 471 application during the competitive bidding process. Fees and surcharges that apply but are not listed on the bid will be the responsibility of the bidding company, should their bid be awarded.

 

·         If there is a request for Internal Connections (Category Two) equipment, or Category One equipment listed on this IFCB the applicant will accept bids for functionally equivalent equipment.

 

 

·         HOT SPOTS & SERVICE FOR HOME INTERNET USE DISQUALIFICATION FACTOR:  Service providers are required to bid both services and equipment.  Bids received for only services or only equipment will be disqualified as incomplete.

 

 

·         DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: The applicant will not accept bids from manufacturers of equipment deemed a national security threat by the Federal Communications Commission. The list of prohibited equipment is available here: https://www.fcc.gov/supplychain/coveredlist. Vendors that submit bids that include these manufacturers will have their bids disqualified.

 

·         DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Vendors must complete and include the C2 Cover Page with their bid. Bids received without the cover page will be disqualified.

·         DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Service providers are required to bid the entire hardware project.  Bids for individual components, or bids that do not include all of the requested items for the project will be disqualified.

·         DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: It will be the bidder’s responsibility to provide documentation about the compatibility requirements listed in this IFCB. Vendors that submit bids without documentation demonstrating the required compatibility listed in this IFCB will have their bids disqualified, unless that vendor has bid the preferred make/model number listed.

·         DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Applicant will not accept bids for refurbished equipment. Any bids containing refurbished equipment will be disqualified.

 

·         DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Vendors who wish to bid must attend one of two mandatory site visits. Vendors who submit a bid but have not attended a meeting will be disqualified.

·         DISQUALIFICATION FACTOR BMIC: Service providers are required to bid the entire maintenance project.  Bids for individual components of the project, or bids that do not include all of the requested items for the project will be disqualified.

·         DISQUALIFICATION FACTOR BMIC: Vendors must complete and include the C2 Cover Page with their bid. Bids received without the cover page will be disqualified.

·         DISQUALIFICATION FACTOR BMIC: Maintenance bids listing only an hourly rate and not a monthly or annual total will be disqualified.  Vendors quoting an hourly rate are required to also a) confirm that you have the ability/expertise to maintain all of the equipment listed and b) propose a number of hours at a particular rate monthly to properly maintain the entire list of equipment.  Bids that contain only hourly rates, without confirmation that the company can service the list of equipment, or without a monthly total will be disqualified.

          

 


Services and Equipment Requested :

UPDATE 12/17/24: THE IC PORTION OF 470/IFCB# 250007250 HAS BEEN CANCELLED AND REPOSTED. IF YOU HAVE SUBMITTED A BID, YOU MUST SUBMIT A NEW BID UNDER 470/IFCB # 250010400. THE ADDRESS FOR ONE OF THE CABLING RUNS HAS BEEN UPDATED.

UPDATE 12/16/24: The bid deadline has been updated to 01/13/2025.

UPDATE 12/16/24: There was a typo for the number of hours needed for BMIC. The correct amount is 96 hours per year, not per month. 


HOT SPOTS & SERVICE FOR HOME USE

The District is requesting bids for 5 hot spot devices including 5 monthly service plans.  Please include any installation, activation, configuration costs in your pricing.  Please include separate pricing for any CIPA/filtering costs.

HOT SPOTS & SERVICE FOR HOME INTERNET USE DISQUALIFICATION FACTOR:  Service providers are required to bid both services and equipment.  Bids received for only services or only equipment will be disqualified as incomplete.

 

CATEGORY TWO

MANDATORY SITE VISITS

Vendors wishing to bid on Category Two internal connections must attend one of two mandatory site visits.  The site visits will be held 12/5/24 and 12/12/24; both will begin at 9AM.  Vendors will meet at the Central Office, 2000 168th Ave NE, Norman, OK 73026, and check in with Andy Mobley.  Bids from vendors who did not attend either of the site visits will be disqualified.

INTERNAL CONNECTIONS

The District is upgrading the fiber optic connections between school buildings from OM1 MM to OM3 MM to enable 10GB connections in the future.  Installation, termination, and verification of fiber strands are needed.

Type of Equipment

Quantity Vendor Should Bid

 

Preferred Make/Manufacturer

Cabling 

1

6 strand OM3 MM fiber runs, SC terminated, approximately 80 feet (ES)

Cabling

1

6 strand OM3 MM fiber runs, SC terminated, approximately 130 feet (MS)

Cabling

1

6 strand OM3 MM fiber runs, SC terminated, approximately 300 feet (HS)

Cabling

1

6 strand OM3 MM fiber run, SC terminated, approximately 500 feet (ES Main to ES 100 Bldg)

Cabling

1

6 strand OM3 MM fiber run, SC terminated, approximately 400 feet (ES Main to ES 300 Bldg)

Cabling

1

6 strand OM3 MM fiber run, SC terminated, HS North (1306 168th Ave NE) to AG Bldg (1436 168th Ave NE)

Cabling

1

6 strand OM3 MM fiber runs, SC terminated, Ag Bldg (1436 168th Ave NE) to MS Gym (1424 168th Ave NE)

Antennas, Connectors, and Related Components

12

10Gb SFP + modules

Antennas, Connectors, and Related Components

12

2 meter OM3 Jumpers

 

COMPATIBILITY REQUIREMENT

Fiber optic FODPs need to be compatible with Hoffman networking cabinets.  SFP+ modules need to be compatible with existing Juniper network infrastructure.

DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: The applicant will not accept bids from manufacturers of equipment deemed a national security threat by the Federal Communications Commission. The list of prohibited equipment is available here: https://www.fcc.gov/supplychain/coveredlist. Vendors that submit bids that include these manufacturers will have their bids disqualified.

DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Vendors who wish to bid must attend one of two mandatory site visits. Vendors who submit a bid but have not attended a meeting will be disqualified.

DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Vendors must complete and include the C2 Cover Page with their bid. Bids received without the cover page will be disqualified.

DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Service providers are required to bid the entire hardware project.  Bids for individual components, or bids that do not include all of the requested items for the project will be disqualified.

DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: It will be the bidder’s responsibility to provide documentation about the compatibility requirements listed in this IFCB. Vendors that submit bids without documentation demonstrating the required compatibility listed in this IFCB will have their bids disqualified, unless that vendor has bid the preferred make/model number listed.

DISQUALIFICATION FACTOR INTERNAL CONNECTIONS: Applicant will not accept bids for refurbished equipment. Any bids containing refurbished equipment will be disqualified.

 

BASIC MAINTENANCE OF INTERNAL CONNECTIONS

The district is requesting bids for 96 hours per year month for BMIC for the below equipment including all multimode and single mode fiber optic cabling and connections, and all Cat 5e/6 copper cabling and connections.

Type of Equipment

Quantity Vendor Should Bid

 

Preferred Make/Manufacturer

Firewall

1

Fortigate 500E

Wireless Controller

1

Ubiquiti Security Gateway Pro

UPS device

2

APC 5000

UPS device

10

APC 1500

Switches

26

Juniper EX2300

Switches

3

Juniper EX4300-32F

Wireless Access Points

131

Ubiquiti UAP-AC-PRO

Cabling

1,152

Cat 5e/6 copper cabling and connections

Cabling

18

SM fiber optic terminations

Cabling

42

MM fiber optic terminations

 

DISQUALIFICATION FACTOR BMIC: Service providers are required to bid the entire maintenance project.  Bids for individual components of the project, or bids that do not include all of the requested items for the project will be disqualified.

DISQUALIFICATION FACTOR BMIC: Vendors must complete and include the C2 Cover Page with their bid. Bids received without the cover page will be disqualified.

DISQUALIFICATION FACTOR BMIC: Maintenance bids listing only an hourly rate and not a monthly or annual total will be disqualified.  Vendors quoting an hourly rate are required to also a) confirm that you have the ability/expertise to maintain all of the equipment listed and b) propose a number of hours at a particular rate monthly to properly maintain the entire list of equipment.  Bids that contain only hourly rates, without confirmation that the company can service the list of equipment, or without a monthly total will be disqualified.


There is an additional document associated with this IFCB. Please click the buttons to download the document.

Little_Axe_C2_COVER_PAGE4.pdf
2025_C2_Bidding_Instructions152.pdf

You need to login / register to upload bid.

Questions Received with Applicant Answers   ( Ask Questions? )




Requested 10G SFP+ modules have a LC connection, will terminate multi-mode fiber with LC connections instead of SC. Is that acceptable? Need to clarify the BMIC. Has 96 hours per month. Should that be 96 hours for the year?

Answer:

The SFP+ modules should be LC. The fiber terminations in the FODPs should be SC.  

 

96 hours is per year.